Wisycom BFLR1-B-SC RF Over Fiber Rx

Wisycom BFLR1 Module

Wisycom BFLR1 Module — Portable RF over Fiber unit equipped with a photodiode that transforms an optical signal to an RF signal.

The BFLR1 module can work in:

  • IFB mode: to send low power IFB/IEM signal over fiber to a remote area

  • ANT mode: to receive signal from an antenna placed on a remote area

FEATURES:

  • Monitor & control through Bluetooth to adjust parameters in real time (Wisycom BT App)

  • Wide RF band: 170-1260 MHz

  • Operating voltage range: 9 ÷ 18 Vdc

  • 2 RGB LEDs for RF overload and system status indication

  • Easy configuration thru an high contrast OLED white display and 4 key navigation buttons

  • remote power supply from the RF connector (on ANT mode)

  • DC power for external amplifier 12V 200mA for PAW or LBP (on IFB mode)

undefined
FREQ RANGES 170-1260MHz
RF CONNECTORBNC-F
DC POWER FOR EXTERNAL AMPLIFIER+12Vdc, 200mA max (for PAW, LBP/LNP)
TUNABLE FILTER470-758MHz (UHF), 40MHz of BW
FIXTED FILTER820-832MHz, 733-758MHz, 940-960MHz
RF TO FIBER LINK WORKING MODESANT (for reception link), IFB (for transmission link)
OPTICAL CONNECTORSC/APC or ST/APC or LC/APC
INPUT OPTICAL POWER RANGE-6dBm to 6dBm [0.25mW to 4mW]
MANAGING INTERFACEDisplay menu and 4 buttons, Bluetooth 5 (Wisycom BT App)
LEDs2 multicolor RGB LEDs to easy indicates BFLx1 status, LED1 status: red: RF overload, blue: booster enabled, green: RF, LED2 status: red: alarms, blue: Bluetooth enable, green: no alarm, no Bluetooth
POWER SUPPLY9-18Vdc
POWER CONNECTORHirose 4pin (pin1: GND, pin4: Vdc),
POWER CONSUMPTION1,2 W (DC transmission amplifier OFF) - 3,5 W (DC transmission amplifier ON)
DISPLAYHigh contrast OLED white display (128 x 64 pixels)
TEMPERATURE RANGE-10-+55 °C
DIMENSIONS70.2mm(L) x 127.1 mm(H) x 26.1mm(D)